Elastomeric roll insulation

It is worth mentioning that these insulators have aluminum coated models with thicknesses of 130 microns and 170 microns threaded and 230 microns, which 130 and 230 micron models are for indoor spaces and the 170 micron threaded aluminum coating is for indoor and outdoor spaces. Due to the polyester fibers used in aluminum, it has a very high resistance to the ultraviolet rays of the sun and climatic conditions.

It should be noted that roll insulation is used to insulate pipes of size 3 and above, air ducts, tanks, cooling and heating collectors, building walls, etc. It is recommended for air ducts in order to Ease of implementation, use elastomeric insulation with adhesive backing. These insulations have a standard width of 1 meter and depending on the thickness, they have varying lengths from 8 to 30 meters.

Types of roll insulation

Rolled insulation is used to insulate steel pipes size 4" and above, tanks, facility collectors, building walls, etc. and has the following models:

Simple roll insulation

This insulation roll has thicknesses of 6, 10, 13, 16, 19 and 25 mm and is used for insulation in indoor spaces.

Elastomer insulation roll with simple adhesive backing

Rolled elastomeric insulation is suitable for insulating air ducts, tanks and building walls and must be used in indoor spaces.

Threaded adhesive back roll insulation

These insulations are special for cases where dynamic load is involved and the surface that needs insulation has movement, and because of the need for higher tensile strength, reinforced fibers are used in the adhesive structure. Some engineers prefer the use of this type of adhesive-backed roll insulation for galvanized channels over the simple adhesive-backed roll insulation model.

130 micron coated insulation

This model is the simplest aluminum-coated model, which is used to prevent possible insulation damage in indoor spaces and does not have the ability to be used in military spaces.

170 micron filament reinforced rolled elastomeric insulation

This model is the highest quality insulation model with aluminum coating and due to the fibers used in the aluminum structure, it has the ability to be used in private and covered spaces, and it is strongly recommended to use this model for open spaces.

230 micron coated insulation

This insulation model has a very good resistance against mechanical shocks and is recommended for indoor spaces due to its beautiful appearance and high resistance. It should be noted that this model is not for soldier spaces.

The thicknesses of STI FLEX elastomeric roll or sheet insulation are declared as follows:

Elastomeric foam and elastomeric insulation rolls or elastomeric foam insulation made of EPDM are available in thicknesses: 3 mm, 6 mm, 10 mm, 13 mm, 16 mm, 19 mm, 25 mm, 32 mm, 40 mm and 50 mm. (Mentioned thicknesses are available in various types, such as: simple, adhesive back, with aluminum coating and adhesive back with aluminum coating, etc.)

It is worth mentioning that elastomeric insulation or elastomeric foam from 50 mm thick and above is produced and supplied according to the order and request of the respected employer.

Also, STI company, due to having special insulation cutting machines, can cut and deliver elastomeric insulations to various dimensions and sizes according to the request of respected customers and according to the needs of the mentioned project.

Advantages of elastomeric roll insulation

Fireproof and fireproof, waterproof and with a closed cell structure, sound insulation (sound absorbent), with a closed cell structure, very high useful life, suitable for all kinds of weather conditions, very small heat transfer coefficient, high speed in installation and implementation , protection against corrosion between insulation and pipe (metal), self-adhesive insulation and adhesive foam, environmentally friendly, resistant to ultraviolet rays, colorable and with valid domestic and foreign certificates